If a vehicle has a strong odor such as a musty mold type of odor, or an odor of state cigarettes the best way to remove that odor is to blast the vehicle with a High Ozone Shock Treatment.

The way to do this is to place a high powered ozone generator in the vehicle and run it until the odor is removed. Our units have special countdown timers on this to make this easy to do.

Many times this takes as little as 20 minutes.  Sometimes vehicles have more stubborn odors and longer treatments are required. There is no reason to overdo it as ozone is very strong and can get the job done fast which is perfect for car dealers.
 

Another great method to ozonate cars is to place the ozone generator on top of the car and run a hose from the duct hose adapter into the window of the vehicle.  This is generally considered a better method to ozonate a car because the ozone generator will always have a "clean air draw" and not risk the possibility of running out of oxygen in the small cabin of a car when all of it's oxygen is has already been converted into ozone which can sometimes happen. The XT-6000S has an optional Duct Hose Adapter meant for just this use.

They are designed for odor removing high ozone shock treatments of unoccupied areas. 

They feature a brand new patented method of corona discharge ozone generation, that's the latest in 21st century technological design.

They are used to give shock treatments in specific areas to combat strong odors, and kill mold spores and bacteria.

The new style, patented ozone generator elements inside the unit require no maintenance. 
They produce Zero Nitrogen Oxides that can make some ozone generators dangerous and offensive.

The Countdown Timer runs the machine from 10 minutes up to 2 1/2 hours and then it shuts the unit off. On the XT-6000S the timer goes up to 7 hours. The Continuous mode allows for longer, or overnight applications.  It's smart chip remembers the timer setting last set even if the unit is unplugged!

All Air-Zone® ozone generators feature  United States Patented Ozone Elements Old style ozone "plates" may create large amounts of Nitrogen Oxides which are offensive, irritating, and dangerous. Air-Zone's patented ozone elements are in a permanently molded housing, that require NO adjustment whatsoever.  They also don't produce dangerous Nitrogen Oxides.   Air-Zone® uses 24 carat gold plating in our United States Patented ozone elements to help prevent corrosion. We also use high temperature, shatter resistant, tempered glass in our innovative ozone elements. Old style ozone "plates" consist of flimsy, easily corroded, steel screens and delicate, thin pieces of glass or mica, less than a millimeter thick. They must ALWAYS be kept perfect alignment or there is a chance that screens will touch and the transformer will short out and become a fire hazard. We do not use MICA ozone plates in our ozone generators. MICA is the cheapest and worst material to use in an ozone plate.  MICA easily breaks, flakes apart, burns, and shorts out the generator.  Stay far away from any ozone generator using a MICA ozone plate. Click Here to learn why our US patented ozone elements are far superior than "old style" mica ozone plates. If not cleaned and aligned constantly, old style ozone "plates" will produce less ozone, and possibly even spark out dangerous high voltage electricity. Air-Zone's® patented ozone elements solve all these problems. Old style ozone "plates", first designed in the 1800's,  must be removed, scrubbed clean, dried, and be meticulously reassembled, or they will not work correctly. Even with all that work, their life span is notoriously short. Air-Zone's® low cost, patented ozone elements can be quickly cleaned with the special included element cleaning tool we include with every ozone generator.  They can be replaced in minutes with a screwdriver. Old style mica ozone "plates" consist of 4 separate parts. Each of the 40 pieces in a competitors 10,000 mg/hr ozone generator must be meticulously installed and aligned for the ozone machine to work properly. Our corona discharge elements are many more times powerful than UV Ultraviolet bulbs. Air-Zone's® U.S. PATENTED Ozone Elements We DON'T use cheap, outdated MICA ozone plates like these: Why use outdated  100+ year old ozone plate technology when  Air-Zone® uses a patented, no adjustment ozone element?!!

A electronic protection circuit and fuse built into the units prevent the internal components from overload & burnout.

The easy-to-replace, 3M filters are only $2.00 each, and lasts for months. 
They keep the inside of the unit dust free so that ozone output does not drop as in may ozone generators as they become dirty.

These units use very little electricity, and are completely portable.
Multiple XT-6000's can be used at the same time for even more ozone output power.

These units are not meant for occupied areas, as they are too powerful to be turned down to acceptable air purification ozone levels. They are only to be used in unoccupied spaces.

Air-Zone® XT-6000S
High Powered Professional Ozone Generator
Heavy Duty Stainless Steel Cabinet

Heavy Duty Thick Stainless Steel Case & Chassis	Patented Xetin Ozone Produces Zero Nitrogen Oxides 21st Century High Tech Design BUILT IN COUNTDOWN TIMER Fully Variable Ozone Output  with additional 2000/4000/6000 mg/hr Ozone Element Selector Switches. Our Ozone outputs are rated in High and Low humidity environments. Extra Heavy Duty Thick Stainless Steel Case & Chassis Internal  Electronic Overload Protection Virtually Maintenance Free
Heavy Duty Industrial Stainless Steel Case	Fully Variable Ozone Control with Timer

Air-Zone® Professional Ozone Generator Heavy Duty Industrial Stainless Steel Cabinet XT-6000S Price $899.99

The XT-6000S is perfect for use in car dealerships where equipment is not always treated as gently as a homeowner would.  It has a very sturdy outer stainless steel case and internal steel chassis that makes it a much more rugged machine than the standard XT-6000. 

In fact the genesis of this machine was the request of car dealers who asked us to make an XT-6000 with a more rugged stainless steel case. 

We did what they asked us to and made a very easy to use ozone machine that is PERFECT for car dealers and automobile detailers.

The Air-Zone® XT-6000S also has an optional industry standard 4 inch duct hose adapter that can be easily attached to it.  This makes it perfect to direct ozone into hard to reach places, and ozonate vehicles.

The internal electronics of the XT-6000S are encased in silicone to prevent any oxidation of the internal components.
In other words, these units will not self deteriorate in a high ozone environment as many other ozone generators do.

Technical specifications Rated Ozone Output -XT-6000S:  Selectable Ozone Outputs of 2000 mg/hr, 4000 mg/hr, and 6000 mg/hr. Three Power Transformers, Individually selectable. Maximum Ozone Output: 6477 mg/hr. Our Ozone outputs are rated in High and Low Humidity environments. Ozone Generation Method: US Patented corona. 107 CFM Heavy Duty Fan with precision ball bearings. Ozone Air Flow Rate: 75 CFM. Continuous use mode, plus a built in electronic timer of 30 minutes - 7 1/2 hours. Longer run times can be achieved with a separate lamp style timer. Stainless Steel Heavy Duty Industrial Case Optional 4" Industry Standard Reinforced Output Vent. Electrical Source: AC 110V- 120V, 60 Hz Electrical Consumption: 0.6 amps - 0.8 amps 48 Watts - 96 Watts max. Fused: 2 Amps. Fused: 5 Amp x 1 (in external fuse holder), 2 Amp x 3, (on circuit board). Dimensions: 21.57"(L) X 6.33"(W) X 8.18(H) Length with Duct Hose Adapter is 26". Weight - 17.5 lb. Five Year Warranty!

Air-Zone® XT-6000S High Powered  Heavy Duty Stainless Steel Professional Ozone Generator  Optional Duct Hose Adapter

 

Air-Zone® Professional Ozone Generator Heavy Duty Stainless Steel Cabinet XT-6000S Price $899.99

The optional Duct Hose Adapter is available for routing the ozone to a standard 4 inch duct hose. The Duct Hose Adapter can be mounted on to the front of the machine.  The user can then connect a standard 4 inch duct hose on to the ozone air outlet. The ozone generator can then be kept out of the room being treated. In this manner the machine itself is not exposed to the ozone. This can be useful because sometimes a room can actually run out of oxygen if it has all been turned into ozone already. By connecting the machine to a "clean air draw" more ozone can be produced than if it were left in a room where all the oxygen has already been converted into ozone. XT-6000S Duct Hose Adapter

Air-Zone® uses completely sealed, high voltage transformers, that can withstand a lot of abuse before shorting out. They are designed specifically for our ozone generators.  Combined with our innovative ozone element design, it is very rare that one of our power transformers blow out.

Competitors use off the rack, open iron core transformers. The exposed iron can quickly rust and deteriorate. These types of transformers are not specifically designed for use in an ozone generator, and have a hard time maintaining a long life span in this type of machine.

Some companies use the same exact transformer in many different sized models.

Air-Zone® uses multiple transformers in our different models.  How can a single transformer that is used in a small ozone machine be expected to handle the much higher load in a large ozone generator?

Many competitors machines simply use ONE transformer, the SAME EXACT transformer in many of their different low and high ozone output generator models.

Whether it be a single plate 1000 mg/hr model, a 5 plate 3600 mg/hr model, a 5 plate 5000 mg/hr model, or a 10 plate 10000 mg/hr model, some manufacturers use the same exact transformer in every machine.

How can the SAME transformer that is expected to handle one high voltage ozone element, handle ten high voltage ozone elements?

If a competitor states "Our transformer is so good we can use the same one in our low powered model as our high powered model" then what justifies the huge jump in price between the low and high powered models?
It seems to us they are just charging the customers empty dollars of more and more profits for increased ozone power.

That leads us to two possible conclusions: Either the transformer in the 10 plate 10,000 mg/hr model is woefully undersized, or 1000 mg/hr ozone generator is using a transformer that is already properly sized for a higher powered machine,

If the latter is the case, and the ozone plates are as low cost as they say, then why the huge price jump between lower and higher powered ozone generators?

That's why ozone generators that are "upgradable" by simply adding more ozone plates are not very well designed. The load on the transformer HAS to be radically different on a single or five plate ozone generator. 

This is proven by the fact that when a competitor adds 4 more ozone plates to a 1000 mg/hr machine that the total ozone output does NOT equal 5000 mg/hr. 

The "upgraded" generator now only puts out 3600 mg/hr, the missing 1400 mg/hr of ozone output has been lost because the transformer has a hard time handling the different load.

That proves that the load is radically different when you simply add more ozone plates to a power transformer.  If the transformer has been strained so that it looses that much ozone power, then it can be concluded it is that much closer to straining and blowing out. 
It has to run at a higher temperature. 

So if competitors ozone plates are as cheap in cost as they say, and they use the same transformer in a 1000 mg/hr machine AND the 10,000 mg/hr machine, what justifies the more than $700.00 cost difference between the two models?

Our XT-2000 uses a single transformer. The XT-4000 uses 2 transformers. The XT-6000 and the XT-6000S use 3 power transformers.  Our XT-14000 uses 6 power transformers and our XT-28000 uses 12 separate transformers.

We do this because to present a balanced load, and to have even power distribution. 
It is better to use multiple transformers when doubling or tripling the ozone power.
It only makes good sense. It makes for a more balanced ozone machine.

We don't just add two more ozone elements to the XT-2000 to make it a 4000 mg/hr machine.
The XT-4000 uses 2 separate transformers. Simply adding ozone elements isn't the proper solution.  Adding 2 more elements would NOT equal 4000 mg/hr. It might only increase the ozone power to 3200 mg/hr because the load presented to the transformer would be completely different.

That's why ozone generators that are "upgradable" by simply adding more ozone plates are not very well designed. The load on the transformer HAS to be radically different on a single or five plate ozone generator.

Keep in mind the fact that competitors also use ozone plate technology where each "plate" has 3 pieces in it that can easily move around.  They use a spring system to keep each part of the plate in perfect alignment. A 10 plate, 10,000 mg/hr ozone machine will have 30 separate pieces in its 10 ozone plates!  A 10,000 mg/hr "plate type" ozone machine has 30 parts that must ALWAYS be in perfect alignment or disaster will occur.

If a single piece of the glass or mica non-conductor breaks, cracks, or just slips out of alignment due to a lack of spring tension, then the electrical conductor, screen parts of the ozone elements can arc and cause an electrical short. 
When an ozone plate short outs, the transformer is also shorted out.  No matter how well it is built, a transformer cannot stand being shorted out for very long.  Electrical transformers cannot stand to have a high voltage, zero ohm load on them for very long without being put under a huge amount of strain.

Air-Zone® not only uses multiple transformers in our higher powered units to help balance the load, they also use our U.S. patented ozone elements which do not have components in them that can move, or shift out of alignment. 
There is no way for them to short out as standard ozone plates can.

Don't buy the argument that using multiple transformers gives a machine more to break down. 
The truth is if properly sized transformers are used and not strained to capacity, there is very little change they will blow out.  Simply adding ozone plates as other manufacturers do, is what overloads electrical transformers and makes them more likely to blow out.

Our XT-14000 and our XT-28000 use special monitoring circuits, and indicator lamps on the front panel to always let the user know the status of each ozone element and transformer.
No other ozone generator made has that feature.
If a transformer ever blows the user will know about it right away. Because of these units modular construction this problem is very easy to fix.

Air-Zone® are simply more stable ozone generators than most other brands.
Electronic protection circuits and fuses prevent our internal components from overload & burnout.