The Air-Zone®
XT-800
is the worlds first remote
controlled air purifier / ozone generator.
It is designed
for air cleaning & odor removal of medium to large sized rooms. It
features a brand new patented method of corona discharge ozone generation,
that's the latest in 21st century technological design.
Providing air
cleaning & odor control in bedrooms, offices, and rooms up to 60' X
60' or larger.
The XT-800
can also be used to give shock treatments in larger areas to combat strong
odors.
The fully variable
ozone control & built in timer make it perfect for use in occupied
areas.
It can even be
used to clean the air in a bar, restaurant, or small club.
The problem with
most air cleaners is that they are just not strong enough, or they are
too strong as to be overpowering. Getting up to walk across the room to
adjust the ozone 5-10 times an hour can be annoying.
With the remote
control you are less likely to over use ozone, which makes this a safer
machine to operate.
With the wireless
remote you can now control exactly the amount of ozone you want, as easy
as changing the channel on your TV!
Even
with the remote control the XT-800
is still priced
LESS
THAN HALF
of
our competitors machines!!!
The new style,
patented ozone generator "plates" inside the XT-800
require
no maintenance. They produce zero nitrogen
oxides that can make some air cleaners
dangerous and offensive.
Powerful enough
to clean the air in a bedroom, living room, or office, or even a small
restaurant or bar 60 feet by 60 feet or larger in a matter of minutes!
Great for removing
tough odors in large sized areas. Combats mold and mildew odors with high
ozone shock treatments by attacking the offending organisms.
Great for removing
odors quickly in cars.
The Automatic
Electronic Timer enables the user to set shorter
safe high ozone shock treatment times of 10, 20, 30, 40, or 50 minutes
to accomplish smaller jobs such as automobile disinfection.
The Air-Zone
XT-800 is made inside and out from
structurally reinforced
High
Impact Rust & Oxidation Proof PVC Plastic.
Even the electronics
are encased in silicone to prevent any oxidation of the internal components.
In other words,
this unit will not self deteriorate in a high ozone environment.
| The "Burst
Level Control" on the XT-800
enables the user to set short intervals of ozone "bursts" that make this
unit extremely versatile for room air purification.
This will burst
the ozone on for either 2, 5, 10, 20, 25, 30, 40, 50, or 60 seconds per
minute, thereby creating a lower total ozone output.
That
means this unit can be used in the smallest of rooms as well as
large rooms, without the ozone level becoming overpowering because it can
be dialed down to such a low level.
In addition there
is a 10 - 90 minute countdown timer
on the units so that bacteria killing High
Ozone Shock Treatments can be performed
easily in unoccupied rooms.
The XT-800
also features a Half Power Switch.
This enables the user to switch off one transformer of the unit essentially
turning it into an XT-400.
This is especially
useful for lowering the total output in smaller areas. |
|
Air-Zone®
XT-800
XT-800
Half
Power Switch
|
The
Air-Zone®
XT-800 is designed to be a low maintenance, reliable
machine.
All Air-Zone®
ozone
generators feature
United
States Patented Ozone Elements
Old style ozone
"plates" may create large amounts of
Nitrogen Oxides
which are offensive, irritating, and dangerous.
Air-Zone's
patented ozone elements are in a permanently molded housing, that require
NO
adjustment whatsoever.
They also don't
produce dangerous Nitrogen Oxides.
Our elements use
24 carat gold plating on our elements internal components to help prevent
corrosion.
The use of high
temperature, shatter resistant tempered glass is also incorporated in our
innovative U.S. Patented
ozone elements.
Old style ozone
"plates" consist of flimsy easily corroded steel screens and delicate thin
pieces of glass or mica which must ALWAYS
be in perfect alignment.
We
do not use MICA
ozone plates in our ozone generators.
MICA
is the cheapest and worst material to use in an ozone plate.
MICA
easily breaks, flakes apart, burns, and shorts out the generator.
Stay far away
from any ozone generator using a MICA
ozone
plate.
Click
Here to learn why our US patented ozone elements are far superior than
"old style" mica ozone plates.
If not cleaned
and aligned constantly, old style ozone "plates" will produce less ozone,
and possibly even spark out dangerous high voltage electricity.
Air-Zone's®
patented ozone elements solve all these problems.
Old style ozone
"plates", first designed in the 1800's, must be removed, scrubbed
clean, dried, and be meticulously reassembled, or they will not work correctly.
Even with all that work, their life span is notoriously short.
Air-Zone's®
low cost, patented ozone elements can be quickly cleaned with the special
included element cleaning tool we include with every ozone generator.
They can be replaced in minutes with a screwdriver.
Old style mica
ozone "plates" consist of 4 separate parts. Each of the 40 pieces in A
10,000 mg/hr ozone generator must be meticulously installed and aligned
for the ozone machine to work properly.
Our corona discharge
elements work much better than UV Ultraviolet bulbs. Click
Here to read where General Electric states that ultraviolet light does
not kill mold. |
Air-Zone's
U.S.
PATENTED
Ozone Elements
Why use outdated
100+ year old
ozone plate
technology when
Air-Zone®
uses a patented
the no
adjustment necessary
ozone element?!!
Air-Zone's®
patented
ozone elements
can be cleaned
in seconds
with the included
element cleaning
tool.
|
|
An electronic
protection circuit and fuse prevent the internal components from overload
& burnout.
The easy-to-replace,
inexpensive 3M filter pad lasts for months, & keeps the inside of the
unit dust free.
10 filter pads
are included with every unit, and similar replacement filters cost pennies.
Uses very little
electricity.
The Air-Zone
XT-800
is the powerful, most versatile ozone generator available for it's price
anywhere!
Test
Measurements of the XT800
Ozone Generator
XT-800
|
Ambient room temperature:
80.3 F
Room size: 17
x 12 x 8.3 foot ( 1693 cubic ft ), no ventilation
Ozone Concentration:
35 ppm, Ozone Air Flow Rate: 14.8 CFM
Ozone Output
Per Hour: 800 mg/hr.
|
Test Time
|
5 minutes
|
10 minutes
|
30 minutes
|
60 minutes
|
|
Ozone Concentration
|
0.3 ppm
|
0.4 ppm
|
0.55 ppm
|
0.6 ppm
|
Test conducted with
the measuring instrument at a 5 foot distance from the ozone generator.
|
Test Time
|
60 minutes
|
90 minutes
|
|
Ozone Concentration
|
0.26 ppm
|
0.26 ppm
|
Test conducted with
the measuring instrument at a 12 foot distance from the ozone generator.
Test
of Nitrogen Oxide NO+NO2:
The ozone measuring sensor was placed
directly in front of the ozone generator.
Zero Nitrogen Oxide levels could be
detected by the measuring device.
|
The ozone concentration is dependent
upon the location, and running time of the ozone generator. The 12 foot
distance used in the second study is equivalent to placing the unit anywhere
in the designated area. Centered in the middle of the room, the unit was
never more than 8.5 feet from the furthest point in the room.
Test conducted October 2001
|
|
Two
Years Parts and Labor Complete Warranty.
Technical
specifications
Rated Ozone Output
Per Hour:
13 mg/hr - 800
mg/hr
ACTUAL OZONE
OUTPUT: 890 mg/hr
(ozone
output verified by Société Générale
de Surveillance)
Generation Method:
Corona Discharge, US patented
Ozone Air Flow
Rate: 37 CFM with a quiet precision ball bearing fan
Electrical Source:
AC 110V-120V, 60 Hz
Electrical Consumption:
0.09 Amp, 10 Watts
Noise Level:
45 dB - 49 dB.
Dimensions:
11.38" ( L ) X 4.24" ( W ) X 4.65" ( H ).
Weight - 4 lb..
XT-800
|
Price; $439.99
|
|
Buy 2 and
save!!!
$859.99
|
|
Air-Zone
can
make your home a clean
air zone!
|
