Our elements use 24 carat gold plating on our elements internal components to help prevent corrosion. 
The use of shatter resistant, high temperature, tempered glass is also incorporated in our innovative U.S. Patented ozone elements.

Old style ozone "plates" consist of flimsy easily corroded steel screens and very delicate thin pieces of glass or mica which must ALWAYS be in perfect alignment.
If not cleaned and aligned constantly, old style ozone "plates" will produce less ozone, and possibly even spark out dangerous high voltage electricity.

Air-Zone® patented ozone elements solve all these problems.

Old style ozone "plates", first designed in the 1800's, must be removed, scrubbed clean, dried, and be meticulously reassembled, or they will not work correctly.  Even with all that work, their life span is notoriously short.

Air-Zone's® low cost, patented ozone elements can be quickly cleaned with the special included element cleaning tool we include with every ozone generator.  They can be replaced in minutes with a screwdriver.

Old style mica ozone "plates" consist of 4 separate parts. Each of the 40 pieces in A 10,000 mg/hr ozone generator must be meticulously installed and aligned for the ozone machine to work properly.

Our elements use 24 carat gold plating on our elements internal components to help prevent corrosion. 
The use of shatter resistant, high temperature, tempered glass is also incorporated in our innovative U.S. Patented ozone elements.

Old style ozone "plates" consist of flimsy easily corroded steel screens and very delicate thin pieces of glass or mica which must ALWAYS be in perfect alignment.
If not cleaned and aligned constantly, old style ozone "plates" will produce less ozone, and possibly even spark out dangerous high voltage electricity.

Air-Zone® patented ozone elements solve all these problems.

Old style ozone "plates", first designed in the 1800's, must be removed, scrubbed clean, dried, and be meticulously reassembled, or they will not work correctly.  Even with all that work, their life span is notoriously short.

Air-Zone's® low cost, patented ozone elements can be quickly cleaned with the special included element cleaning tool we include with every ozone generator.  They can be replaced in minutes with a screwdriver.

Old style mica ozone "plates" consist of 4 separate parts. Each of the 40 pieces in A 10,000 mg/hr ozone generator must be meticulously installed and aligned for the ozone machine to work properly.

These advanced ozone elements are basically self cleaning.
They do not need a special cleaning tool.

Twice a year, if needed after heavy use, they can be taken apart and cleaned in minutes with a toothbrush.
It is fast and easy to reassemble them into their non movable housing.

These are high powered corona ozone elements and NOT ineffective
UV Ultraviolet bulbs.

Click Here to read where General Electric states that ultraviolet light will not kill mold.

While these products were great sellers, it soon became apparent that the mica ozone plate setup had many inherent problems.  After a year of constant failures and complaints about these units we determined that there simply had to be a better way to create ozone.

We looked at many designs and found that every design seemed to have a major flaw of one type or another.

This is when we began researching patents for ozone production. We then found one design that seemed to be superior than all others. We then bought the rights to it and began production of our now world famous line of ozone generators.

Air-Zone® patented ozone system has been a resounding success around the world.

So today you can buy the primitive mica plate ozone generators that are sold by many dealers across the web, or you can buy the world famous patented Air-Zone® ozone element system without the inherent problems of the constant alignment of the old fashioned mica ozone plates.

With the Air-Zone® system there is no chance of the plates slipping out of alignment, producing less ozone or possibly even shorting out the unit.

Yet our patented ozone elements can be easily cleaned and replaced when their life span has run out as ALL ozone elements will eventually corrode and not work as well.

Our elements last at least 3-5 years, and are very economical to replace.

One word.  Money.  Buying thin, cheap sheets of mica, and pairing them with screening material is the allows one to make an ozone plate for pennies. By using a store bought power transformer, a primitive, not very well designed, ozone generator can be made for great profit. 

Where do you think these dealer middlemen get their profit from in their multi level marketing system?  Why buy from an outside dealer when you can buy direct from an ozone generator manufacturer like Air-Zone®?

These ozone dealers get dirt cheap prices from their manufacturer, and mark the machines up to where they can still get a great profit.

Competitors use off the rack, open iron core transformers. The exposed iron can quickly rust and deteriorate. These types of transformers are not specifically designed for use in an ozone generator, and have a hard time maintaining a long life span in an ozone environment.

Air-Zone® spends the extra money to make quality ozone machines and then sells them direct to the public with no middlemen.
Would you rather spend the extra money paying off the middleman dealer or on a higher quality ozone generator like a trademarked Air-Zone® ozone machine you can buy direct from us, the manufacturer?  Plus we give you a direct factory warranty.
 
 

Instead of properly adding additional power transformers as Air-Zone® does, they take the cheap route and simply add more mica ozone plates. This now compounds the problems of the mica ozone plate system.

Now these middlemen dealers make even a higher percentage of profit off of the consumer on a more expensive machine.

Be sure to avoid those ozone generators that are "easily and inexpensively upgraded" 
by the addition of more ozone "plates".

The truth is that they use only ONE transformer and are more likely to blow out than machines like our units with MULTIPLE transformers. 

Simply adding ozone plates to increase the ozone output puts a dangerous extra load on the power transformers. 

This fact is made very clear that by adding 2 ozone plates to a one plate 1000 mg/hr ozone generator that the total ozone output is only 2600 mg/hr and NOT the 3000 mg/hr it should be.

If the transformer was properly sized the ozone output would equal 3000 mg/hr, but that fact that the resulting output is only 2600 mg/hr is absolute indisputable evidence that the transformer is improperly sized, especially to upgrade the ozone output.

Since the 3000 mg.hr ozone output was NOT achieved, it can only be concluded that the missing 400 mg/hr of ozone was lost because the transformer was not able to handle the extra load of the extra ozone plates.

The extra load on the transformer causes it to get very hot, and it is now prone to completely blow out.

Note that some 1000 mg/hr ozone generators try to add up to four extra ozone "plates" but that the total ozone output ONLY reaches the 3600 mg/hr level, NOT the expected 5000 mg/hr.

Now think about that these multiple ozone plates MUST always be in constant alignment to work properly and avoid shorting out.  So they add more mica plates, and thus more chance of failure, AND increase the load on the transformer!  That is taking a bad situation and making it worse.  Except for their profits of course.

Trying to double or triple the power of an ozone generator by simply adding more ozone plates is a cheap, unsafe, and not very reliable way of trying to increase the ozone output.

Air-Zone® ONLY increases ozone outputs by adding extra ozone elements, AND by properly adding extra power transformers. 

That's why our models with higher ozone output have EVEN ozone output numbers like 2000, 4000, or 6000 mg.hr instead of an erratically designed unit that outputs 1000, 2600, 3400, or 3600 mg/hr. 

Our XT-2000 features a single transformer. Our XT-4000 has 2 power transformers, and our XT-6000 unit has 3 power transformers in it to properly balance the electrical load.

ONLY a poorly designed ozone generator would try to increase the ozone output by simply adding extra ozone plates and not by adding the proper amount of transformers.

Beware of "upgradable output" ozone generators.
They won't last, and are prone to fail simply by the nature of their design as the loss of ozone power when mica plates are added, clearly shows.

Be sure and buy a long lasting, properly designed ozone generator like an Air-Zone®.

Notice these same dealers only offer a "manufacturers defect" warranty and NOT a total "product failure" warranty like Air-Zone® offers. 
That's because they know their machines are more likely to fail and they would rather not be responsible for them. Click Here to learn more about the flimsy so called "manufacturing defects" warranty these other sellers offer.

Do you really want to buy a machine from a multilevel marketing dealer who isn't even directly responsible for you warranty, or on a higher quality ozone generator like a trademarked Air-Zone® ozone generator you can buy direct from us, the manufacturer who will repair your product directly?

It's your money, why not by the best ozone generators made, a genuine Air-Zone® ozone generator!