|
Mold
Test Kits
Mold test kits
are the method professionals use to determine if there is a mold problem.
Testing is the ONLY way to know the severity of the mold problem.
These test kits
are the exact kits used by mold remediation professionals to determine
the presence and type of mold.
This simple, do-it-yourself
test identifies dangerous molds & mildew in 48 hours.
The test is easy
to use.
Simply place the
test's petrie dish in a suspected mold area and leave the lid open for
two hours. Then close the lid and let the test incubate for two days.
This will yield
a positive or negative reading for mold.
If nothing grows
in the dish it means the spore count is so low as not to be dangerous.
If the disc grows
fungus it is apparent that mold is present. At this point the optional
lab analysis is recommended.
The optional lab
analysis is available to indicate the exact count and type of mold &
mildew present.
For an additional
$30.00 the manufacturer will provide a full analysis of the quantity and
type of mold found.
The kits may be
used one time. For multiple area testing additional kits will be required.
using a test to first test the outside air, and comparing it against tests
used in the home is a good method for determining if the indoor level is
higher than normal.
Mold testing is
the only way to know what kind of mold you have.
Testing is also
the only method to know if you have killed the mold after remediation.
If there has been
a mold problem in the past periodic testing every couple of months is recommended
to ensure that the mold has not returned. |
